I know I've been missing in action for several weeks now but, I'm back with a great tutorial to start off your week. Let me introduce you to what I'm calling my
Tool Bracelet.I know it's a small project but a ton of work went into making this tutorial so I'd be happy if you linked to it and shared it with your friends. Infact, I'm going to be giving away
a few Tool Bracelets in a giveaway. Keep an eye out for that giveaway in the next few days.
It's basically a really small and cute bracelet for your scissors or rotary cutter. The Tool Bracelet helps you identify your tool when quilting with a group of ladies at a quilt retreat or during a quilt class or at your quilt group gatherings. The initial of your name is stamped on the plastic disc and is then attached to the bracelet with a jump ring. You'll also notice the bit of bling attached to the flower dangle and scalloped letter disc.
Part One:
Making the Plastic Dangle
Supply List:
Please note: I've taken the time to link nearly every supply you will need to make this project. You can purchase some of your items at most craft stores or you can use the online links I've provided for you. I buy the majority of my beading items online through
Artbeads.com and I've used them for years with 100% satisfaction. They are a great source for a
HUGE variety of beads with quick and reliable service, competitive pricing, and free shipping when you spend at least $10.00. Now my secrets out! lol.
Also, Let me know if you have any trouble with the links and I will try to help or fix it. Thanks.
Warning: Beading and Jewelry making can easily become another craft addiction if you're not careful. lol. It's something I've enjoyed for many years!! Enjoy visiting Artbeads!
- Colored Shrink Plastic by Grafix
- 2" Scalloped Circle Punch by Marvy Uchida
- Retro Flower by EK Success
- Everyday Alphabet Clear Stamps by Heidi Grace
- Clear Acrylic Stamping Block from Joann's (on sale now $4.19)
- Staz-On Jet Black Ink by Tsukineko or Joann's (on sale now $6.29)
- 1/4" Hole Punch
- 1/4" Square Hole Punch (optional)
- Craft Oven (On sale now $35.99) from Joann's Fabric & Craft Store (I used the oven I had on hand)
- Parchment Paper from the grocery store
- Bamboo or wooden skewers from the grocery store
- (19) 4mm Swarovski Round white pearls from Artbeads
- (4) Silver Bali Beads (more expensive option @ $1.92 a bead) from Artbeads
- or (4) 6mm Swarovski Bi-cone Crystals (less expensive option @ .16 cents a bead) in any color from Artbeads
- (1) 4mm Silver Daisy Spacer from Artbeads
- (1) 2mm Silver Bead from Artbeads
- (1) 10x4mm lobster claw from Artbeads
- (2) 2 x 2mm crimp beads from Artbeads
- (1) 5.3mm open jump ring from Artbeads
- (1) 2" Head pin from Artbeads
- 8" length of Beadalon 49 strand bead stringing wire from Artbeads
- Wire Cutter (on sale now $5.59) from Joann's
- Wire Looping Pliers (on sale now $6.99) from Joann's
- Crimping Tool from Artbeads or Joann's (on sale now $6.99)
Here's a picture of the Shrink Plastic and Big Punches
Here's a picture of the Alphabet Stamps, Black Staz On Stamp Pad, Clear Acrylic Stamp block (not pictured), 1/4" punches and a
before shrinking and
after shrinking look at the shrink plastic.
Instructions:1. Decide on the two plastic colors you want to use.
2. Punch out the circle with the scalloped circle punch.
3. Punch out the flower using the retro flower punch.
4. Decide on the letter you want to use from the Everyday Alphabet set.
5. Attach letter to the clear acrylic stamp block.
6. Center and carefully stamp letter on plastic circle (it will slide if you're not careful). Let dry.
7. Make sure to read over the manufacturer's instructions for using the shrink plastic.
8. Preheat craft oven/toaster oven to 300-350 degrees. I found the 300 degrees worked best.
9. Cut two pieces of parchment paper to fit your oven tray. One for the bottom of tray and one to cover your shrink plastic.
10. Place one piece of shrink plastic in the oven at a time. You can do more it's just easier with one piece at a time.
11. Cover with parchment paper and lightly hold down with skewer.
Note: This will help to prevent the plastic from sticking when it curls. I found the circles curled really easily and the opposing edges would stick to each other and then not uncurl like the instructions indicate. You will want to do a few testers for your oven and to get a feel for how the plastic works and shrinks and again please make sure to read over the manufacturer's instructions if you have any questions about the product.
12. Before taking plastic out of the oven, take off the top parchment paper and use the skewer to flatten the edges by rolling the flat edge over the plastic like a rolling pin. It does harden quickly.
Part Two:
Making the Crystal Flower Dangle
These are the components you will need to make the Crystal Flower Dangle.
Supplies Pictured from left to right:- (1) 5.3 mm open Jump Ring
- Plastic Scalloped Circle Disc (shrunk)
- Plastic Retro Flower (shrunk)
- (1) 2" head pin
- (1) 4mm Swarovski Crystal
- (1) 4mm Silver Daisy Spacer
- (1) 2mm Round Silver Bead
Instructions:1. Place Crystal, spacer, and bead on the head pin as seen in picture below.
2. Place wire in Wire Looping Tool making sure to leave approximately a 16th of an inch space between pearl and tool. Close handles. This will curve the wire.
3. Bend crystal side of head pin away from tool and curve the opposite side of wire around the needle part or the tool until it crosses over the head pin.
4. Twist the excess wire around the head pin.
5. Using wire cutters trim the excess wire.
6. Now you're ready to assemble the dangle on the jump ring.
7. Take the jump ring and open it by twisting one side up and one side down. Do not open it by pulling it apart, this will make it easier to close and keep a narrow space where the ends meet
8. Take the plastic disc and place it on the ring with the back/wrong side facing you.
9. Take the plastic flower and place it in front of the back side of disc.
10. Take the Crystal Dangle you just made and place it on the jump ring.
11. Close the ring in the reverse manner I explained in instruction #7.
12. You are now ready to move on to Step #3 Making the Bracelet.
Part Three: Making the Bracelet
and Putting it all Together
Supplies Pictured Above:- (4) Bali Beads or Crystals
- (19) Pearls
- (2) Crimp beads
- (1) Lobster Claw
- (1) 8" length of Beading Wire
- (1) Crystal Flower Dangle (made in Step Two)
- Needle Nose Pliers
- Wire Cutter
Instructions:1. Take the Crystal Flower Dangle and thread wire through the hole.
2. Slip the crimp bead with both ends of wire going through the hole of crimp bead.
3. Leave at least a 1" wire tail.
4. Using the back opening of the crimp tool crimp the bead.
5. Move crimped bead to front opening of crimp tool to fold the crimped bead into each other.
6. Thread on two pearl beads making sure the 1" tail end is also fed through the pearls. It will be a tight fit but it will work.
7. Thread on one bali bead making sure the 1" tail end is also fed through the bali bead. Trim excess wire.
8. Thread on 3 more pearl beads.
9. Thread on 1 bali bead.
10. Thread on 9 pearl beads.
11. Thread on 1 bali bead.
12. Thread on 3 pearl beads.
13. Thread on 1 bali bead.
14. Thread on 2 pearl beads.
15. Thread on 1 crimp bead.
16. Thread on the lobster claw.
16. Feed the remaining wire through crimp bead.
17. Move the crimp bead up the wire toward the lobster claw.
18. Feed the remaining wire through the two pearl beads and the one bali bead.
19. Pull the excess wire the opposite direction of the lobster claw to secure and create a tight fit.
2o. Cut
EXCESS wire close to the bali bead making sure
NOT to cut the wire for the bracelet.
Congratulations! You are now done!Attach your "Tool Bracelet" to your favorite scissors or rotary cutter.
Just a note: I've made my best effort to link you to a SMALLER Bali Bead but if your (4) Silver Bali Beads are
TOO big they may not fit through the hole of your rotary cutter but you won't have any problem with your scissors. When you're looking for Bali Beads they don't always give the size.
Hint: The more the bead costs $$$ the bigger the bead will be.
I hope you enjoyed this tutorial and if you have any questions or see any mistakes please let me know. Thanks!
L to R: Rae Ann, Me, Jodi, Lori, and Judi.
I didn't take very many pictures but when I saw these Moda Chocolate Candy Bars I had to pull out my camera. I love, love, love the darling and clever packaging. I sooo wanted to buy one but as I started thinking about it I realized that I'd never use it because it's just TOO CUTE to OPEN, if you know what I mean. So, I took a picture of it instead. . . although. . . I still may have to eventually buy one. . . we will see. . . must resist temptation. . . must. lol.
Here's a picture of the sweet gifts from my friends.
I couldn't resist taking a picture of this pincushion chair that Lori made. She makes the sweetest, cutest, darlingest, things ever. If you haven't visited her blog you need to go right now and check it out. Prepare yourself to be inspired. . . I know I am. Thanks Lori for sharing all of your talents and wonderful ideas with all of us.
